<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=290087781365875&amp;ev=PageView&amp;noscript=1">
Skip to content
English
Contact Support
  • There are no suggestions because the search field is empty.

How do I remove or replace cables in the Legion PowerPro Esports charging cart?

Model: MC-9012-XXX

Instructions to remove or replace cables:

  1. Legion-PowerPro-Esports-Cart_Cable-RemovalEnsure the switch on the side of the cart is in the OFF position.
  2. Open the cart’s front door. Remove the perforated plate, located in front of the charging hub, by unscrewing two upper screws and one lower screw.
  3. Unplug the cables from the charging hub and detach the clips on each tray.
  4. Starting on the side of the cart nearest the charging hub, feed each cable through the hole in the wall and out through the tray.
  5. Reverse this process to replace the cables. Feed the cables from the tray through the hole in the wall and plug them into the charging hub. Reattach the cables to the clips on each tray to secure them in place.

Note: Make sure that the stress relief rings are in the correct position, otherwise the perforated plate will not sit properly when replaced.